Question 1

Why does metal fatigue occur at stresses below the ultimate strength?

Accepted Answer

Metal fatigue occurs under cyclic loading at stresses typically 30-40% of ultimate strength. Repeated stress cycles cause crack initiation and propagation perpendicular to principal tensile stress. After many cycles, cracks reach critical length and suddenly propagate at sound speed, causing immediate failure without significant prior warning or deformation.

Question 2

What is the endurance limit and how does it affect fatigue design?

Accepted Answer

The endurance limit is the maximum stress range below which a metal will not fail regardless of cycle count. Most ferrous alloys exhibit this threshold. In S-N curve testing, stress ranges below the endurance limit show no failure. Engineers use this value to design structures for infinite fatigue life, improving reliability by testing multiple specimens near the threshold stress range.

Question 3

How does the rotating beam test produce an S-N curve?

Accepted Answer

A rotating beam test applies cantilever bending loads to rotating specimens, creating full tension and compression cycles. Multiple specimens are tested at different stress ranges determined from yield strength percentages. Results plot stress range versus logarithmic cycles to failure, revealing the relationship between applied stress and fatigue life, establishing the material's fatigue characteristics.

Question 4

What is Miner's rule and when is it used in fatigue assessment?

Accepted Answer

Miner's rule predicts fatigue failure by summing damage fractions across multiple stress ranges. Each stress range's expected cycles are divided by cycles-to-failure for that range, then summed. If the total exceeds 1.0, fatigue failure is possible. Though lacking physical basis, it is useful for engineering design when structures experience variable cyclic loading histories.

Question 5

How do fatigue cracks initiate and propagate in metals?

Accepted Answer

Fatigue cracks typically initiate at angles to normal stress, then turn and grow perpendicular to principal tensile stress. Cracks propagate under tensile or shear stress but not under compressive stress. Initial growth produces characteristic beach marks on fracture surfaces. Once cracks reach critical length, they propagate rapidly at sound speed, causing sudden failure with characteristic rough fracture surfaces.

Question 6

What factors influence fatigue resistance in structural materials?

Accepted Answer

Fatigue resistance is affected by multiple factors including stress amplitude, mean stress, frequency, stress concentrations, material properties, surface conditions, grain size, temperature, and corrosion. Environmental conditions and combined stresses also play roles. This complexity underscores the need for routine inspection of structures subjected to repeated loadings like bridges, cranes, vehicles, and aircraft.

Question 7

Why is laboratory testing and field monitoring essential for fatigue assessment?

Accepted Answer

Laboratory testing establishes material fatigue characteristics through S-N curves and stress-strain characteristics of steels, enabling engineers to predict failure. Field monitoring detects crack propagation before catastrophic failure. The Silver Bridge collapse demonstrated that fatigue cracks can initiate from manufacturing flaws hidden from inspectors, making continuous assessment critical for public safety.

Усталость металлов

Browse More Videos